Anti Vibration Pipe Support

Industrial piping systems demand robust support against continuous vibration, thermal movement, and mechanical shock. Our anti vibration pipe support range is engineered to isolate these forces, extending service life and cutting maintenance costs across processing plants, power stations, and marine installations. For chilled or cryogenic lines, the Pipe Support for Low Temperature series provides stable load transfer without thermal bridging. In seismic zones, the Seismic Pipe Support models offer certified restraint against lateral and uplift forces. For pump rooms and compressor stations, the Shock Absorbing Pipe Support units reduce impact peaks, while the Pipe Support with PTFE Plate assemblies enable controlled axial sliding at low friction.

The Anti Vibration Pipe Support line combines a reinforced steel housing with replaceable elastomeric inserts that absorb high-frequency vibration and limit structure-borne noise. Each unit is rated for both static and dynamic loads, with an integrated height adjustment of up to 20 mm for on-site alignment. The clamping system prevents pipe sag while accommodating thermal expansion, and the base plate includes pre-drilled anchor holes for fast bolting. Standard finishes include hot-dip galvanizing and epoxy coating for aggressive environments, with stainless steel options available for chemical processing and offshore applications. All components are traceable to heat number and tested to ASME, MSS, and ISO standards, ensuring reliable performance under continuous operating conditions.

• Material options: Carbon steel, AISI 304, AISI 316L, hot-dip galvanized steel
• Pipe diameter range: DN15 to DN600 (1/2 in to 24 in)
• Maximum vertical load: 5 kN to 150 kN depending on model
• Vibration frequency range: 5 Hz to 500 Hz
• Operating temperature: -196°C to +350°C
• Elastomer hardness: 40 Shore A to 80 Shore A
• Corrosion protection: Zinc-plated, hot-dip galvanized, epoxy-coated, electro-polished
• Design compliance: MSS SP-58, ASME B31.1, ASME B31.3, ISO 9001
• Dynamic safety factor: 1.5 for applied shock loads
• Adjustment range: ±10 mm horizontal, +20 mm vertical from nominal height